B-221 – Toilet Seat Cover Dispenser, Stainless Steel

Satin-finish stainless steel. Dispenses 250 single- or half-fold toilet seat covers or one box. Fills from bottom. Unit 15 3/4_ W, 11_ H, 2_ D (400 x 280 x 50mm). Allow 5_ (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit.

Specification:

The surface-mounted toilet-seat-cover dispenser is made from stainless steel type-304, 22-gauge (0.8mm) with detailed welded construction; giving a satin finish to the dispenser as a whole. The dispenser shall have a concealed opening in the bottom for filling. Dispenses single- or half-fold paper toilet seat covers from beveled opening. Dispenser fills from the bottom through the concealed opening. The capacity will be 250 paper toilet seat covers or one box. With the sleek and functional design, this will fit well in almost any restroom. 

Installation:

When mounting the unit on a wall or toilet partition start with two flat-head screws, not furnished by the manufacturer, at points indicated by an S. For plaster or drywall construction, provide concealed backing that complies with local building codes, then secure the unit with flathead screws not furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws, not furnished, or provide 1/8” (3mm) toggle bolts or expansion bolts. Note: Provide a 5” (125mm) minimum clearance from the bottom of the dispenser to the top of any horizontal projection to provide room for filling the dispenser from the bottom.