No products in the cart.
B-262 – Paper Towel Dispenser, 400 C-Fold or Multifold, Tumbler Lock
- Satin Finish Stainless Steel
- Polished Stainless Steel available using the suffix -78
- Surface-Mounted
- Towel Capacity: 525 multi-fold or 400 C-fold paper towels
- Tumbler Lock
- Refill indicator on the cabinet face
Specifications
Satin-finish stainless steel. Dispenses 400 C-fold or 525 multifold towels. Door has tumbler lock and piano-hinge. Hemmed towel tray opening. Unit 10 3/4_ W, 14_ H, 4_ D (275 x 355 x 100mm).
Specification:
The classic series paper towel dispenser adds a fine stainless steel finish to the restroom. Surface-mounted dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have a satin finish. On the front, the door is secured to the cabinet. The piano- hinge and is equipped with a tumbler lock along with the needed key. The paper towel tray will have a hemmed opening to dispense paper towels, this design helps to reduce tears in the paper towels. Unit shall be capable of dispensing 400 C-fold or 525 multifold paper towels measuring 3-1/8″ to 3-13/16″ (79 to 97mm) deep.
Installation:
The wall-mounted unit would be installed with four #10 x 1-1/4″ (4.8 x 32mm) sheet-metal screws (not furnished) at four of the eight mounting holes indicated by an S (top slots and bottom holes preferable). For plaster or drywall construction, provide concealed backing to comply with local building codes, then secure with sheet-metal screws. When adding a concealed backing, we recommend you set the backing to cover a minimum range of mounting hole locations shown on the drawing. This will aid in completing a proper installation. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8″ (3mm) toggle bolts or expansion bolts.